| 烤漆门的特点 |
| 添加时间：2020/9/2 15:32:29 浏览次数： |
| 1、没有封边，分为单面烤漆、双面烤漆。防水处打封边漆，表面光泽。 1. Without edge sealing, it is divided into one-sided paint baking and two-sided paint baking. The waterproof part is painted with edge sealing paint, and the surface is glossy. 2、整体效果好，不滞油污。一般分为亮光、亚光、珠光。最具有视觉冲击力。 2. The overall effect is good, no oil stagnation. Generally divided into bright light, sub light, pearlescent. It has the most visual impact. 3、档次高不易变型可以做浴室柜，易于清洁提高房间的光亮度。 3. High grade, not easy to change, can do bathroom cabinet, easy to clean, improve room brightness. 4、喷漆：为聚脂漆经过喷制工艺制成的门板，无需烤制表面，制成以后为亚光效果。烤漆一般可以调制出30多种颜色，目前最好的烤漆工艺为意大利。 4. Spray painting: it is a door panel made of polyester paint by spraying process, without baking the surface, and it has a matt effect after being made. Baking paint can be prepared into more than 30 colors, and the best baking process is Italy. 5、缺点是工艺水平要求高，废品率高，价格居高不下；使用时也要精心呵护，怕磕碰和划痕，一但出现损坏就很难修补，要整体更换；油烟较多的厨房中易出现色差。比较适合外观和品质要求比较高，追求时尚的年轻高档消费者。在清洁时要注意，不要用钢丝球擦洗，以免留下划痕并且划痕太重不能修复，用重力撞击会有粉末状的物质脱落。 5. The disadvantage is that the technical level is high, the waste rate is high, and the price is high; when using it, we should take care of it carefully, afraid of bumping and scratches, but it is difficult to repair once it is damaged, so it needs to be replaced as a whole; color difference is easy to appear in the kitchen with more lampblack. It is more suitable for young and high-end consumers with high requirements of appearance and quality and the pursuit of fashion. When cleaning, pay attention not to scrub with steel ball, so as to avoid leaving scratch and the scratch is too heavy to be repaired. If it is hit by gravity, powdery material will fall off. |
| 上一页 木门分类 |
| 下一页 木门选购3大误区！ |
Copyright © 技术支持：遨游网络