河北邯郸空压机知名厂

With the rapid development stage of China's wooden door industry, the production technology of wooden doors has been upgrading. Especially, solid wood composite doors have become consumers' preferred wooden door products in recent years.

实木复合门是以装饰单板为表面材料，以实木拼板为门扇骨架，芯材为其他人造板材料的木门，有以下优点：

The solid wood composite door is a wooden door with the veneer as the surface material, the solid wood collage plate as the door fan and the core material as the other wood-based panel material, with the following advantages:

1、充分利用资源，生产成本低

1. Make full use of resources and low production cost

复合门中木材、人造板和各种贴面材料的综合利用，避免处处采用成本相对较高的高档木材，从而可以以在不降低木门的使用性能和装饰性能的前提下有效地降低生产成本。

The comprehensive utilization of wood, wood-based panels and all kinds of veneering materials in composite doors can avoid the expensive wood at higher cost, so that it can effectively reduce production cost without lowering the performance and decoration performance of wooden doors.

2、有利于发挥各种材质的优良特性

2. It is beneficial to give full play to the excellent properties of various materials

复合门的复合结构充分利用了普通木材、珍贵木材和人造板各自的特性。如普通木材的成本低，强度和握钉性能好，在复合门中被作为门的骨架；珍贵树种木质纹理装饰性强，用以制作的薄木单板；而纤维板的材质均匀，铣削加工性能好，在复合门被作为有造型的构件。

The composite structure of the composite door makes full use of the characteristics of ordinary wood, precious wood and wood-based panels. Such as the common wood nail holding strength and low cost, good performance, is used as a skeleton in the composite door; rare species of wood texture and decorative veneer, used for the production of the single board; and fiber board uniform material, good performance in milling, composite door structure has the other as.

尺寸稳定性好、变形小、解决了实木门芯板由于季节变化、含水率变化而引起的开裂变形，甚至油漆后门芯板四周因收缩出现的白边现象。

It has good dimensional stability and small deformation. It solves the cracking and deformation caused by seasonal change and moisture content change, and even the white edge due to shrinkage around the door core after painting.

3、生产灵活性大

3. Large flexibility in production

在复合木门生产中大部分材料是固定不变的，如作为骨架的普通木材和纤维薄板等。个别材料虽然是变化的，但基本上也是标准化材料，如薄木单板、木纹纸、塑料薄膜等可以说都是标准化产品，非常容易采购，准备期很短。因而复合门的生产同实木门比较起来具有很大的生产灵活性。可以说客户需要什么材质（表面材料），就能方便快捷地生产出什么材质的门。

In the production of composite wood doors, most of the materials are fixed, such as common wood and fiber sheet as skeleton. Although the individual materials are changing, they are basically standardized materials, such as veneer, wood grain, plastic film, etc., which can be said to be standardized products. They are very easy to purchase, and the preparation period is very short. Therefore, the production of composite doors is more flexible than the actual wooden doors. It can be said that the customer needs what material (surface material), can easily and quickly produce what material of the door.

但是，实木复合门的生产工艺就相对复杂了。常见的生产工艺有以下几种：

However, the production process of solid wood composite doors is relatively complex. The common production processes include the following:

1、下料（木料或人造板）→构件加工→构件饰面处理（贴面）→拼装→封边

1, blanking (wood or wood-based panel) - component processing, component finishing (veneer), assembling and sealing

该种工艺方法的特点是先把构件做好，表面处理好，然后再组装成门。由于饰面材料很薄，不具备修整条件，因而对构件的加工精度要求较高。另一方面，由于构件贴面是分别完成的，可以安排其纹理方向同实木门一致，以增强其实木感。

The characteristics of the process method are that the components are made well first, the surface is treated well, and then the door is assembled. As the veneer material is very thin and the finishing conditions are not available, the machining precision of the component is required. On the other hand, as the component veneer is completed separately, the texture direction can be arranged in accordance with the real wood door, in order to enhance the wood sense.

门框结构图

Frame structure diagram

2、下料（木料或人造板）→构件加工→拼装→饰面处理→边角处理

2. Blanking (wood or wood-based panel) - processing of components, assembling, finishing and edge treatment

该种工艺方法的特点是先把整体做好，然后再进行饰面处理。在贴切面之前可以对门坯进行修整。

The feature of this process is to do the whole first and then finish the finishing process. The billet can be trimmed before sticking to the cutting surface.

木扇结构图

Wood fan structure diagram

3、 制作门坯（木骨架或人造板胶合）→铣削各种造型→饰面处理

3, making door billet (wood skeleton or wood-based panel gluing) - milling all kinds of molding to finishing treatment

该种复合门的结构特点有点类似于空心门，但面板采用的是厚人造板，可以进行造型加工。其特点是其类似实木门的凹凸效果不是在构件拼装时自然形成的，而是靠刀具加工出来的，因而其造型具有灵活的可选择性。

The structure of the composite door is a bit similar to the hollow door, but the panel is made of thick wood-based panels and can be processed. Its characteristic is that its concave and convex effect similar to solid wood door is not formed naturally when components are assembled, but is processed by cutters, so its modeling is flexible optional.

门压线结构图

Gate line structure diagram

随着木门行业逐渐成熟，我国木门的发展将呈现以下几个趋势。

With the gradual maturity of the wood door industry, the development of wooden doors in China will present the following trends.

1、结构标准化

1, structural standardization

由于木门产品的结构标准化，相应的工艺也就标准化了，原材料的贮备也就有据可循，因此产品结构的标准化是其他工作的基础。但需要说明的是，结构标准化不等于产品标准化，尤其不是指产品规格尺寸的标准化。结构是标准的，规格尺寸是多种多样的，甚至造型都是多种多样的。

Due to the standardization of the structure of wooden door products, the corresponding process is standardized, and the storage of raw materials is also available. Therefore, the standardization of product structure is the foundation of other works. However, it is necessary to explain that structural standardization is not equal to the standardization of the product, especially the standardization of the size of the product. The structure is standard, the size and size are varied, and even the shape is varied.

2、部件模块化

2, component modularization

在产品结构标准化的前提下，将产品拆分为多个标准化或者相对标准化的部件，在生产加工过程中，可以将这些标准化的部件事先加工好，做好库存。生产的时候，直接使用这些半成品。这样做可以大大缩 短产品的加工周期。专业好文，尽在门业视界。

Under the premise of product structure standardization, the product can be divided into several standardized or relatively standardized parts. In the production process, these standardized parts can be processed beforehand and inventory well. At the time of production, these semi-finished products are used directly. This can greatly shorten the processing cycle of the product. Good professional, all in the industry view.

3、 造型多样化

3, diversification of modeling

产品的外观丰富多样，而不仅仅只是平板门。充分利用标准化的结构、模块化的部件，通过多种排列组合，实现多种艺术造型。

The appearance of the product is rich and diverse, not just a flat door. Make full use of the standardized structure, modular components, through a variety of arrangement and combination, to achieve a variety of artistic modeling.

4、管理软件化

4. Management software

很多时候，仅仅靠硬件是远远不够的，曾经有人总结：中国的木门企业管理水平低，从业人员素质低，这确实是一个现实。为此，通过软件来管理和规范木门的生产制造，也变得越来越重要。专业好文，尽在门业视界。

In many cases, hardware alone is far from enough. Some people once concluded that China's wooden door enterprises have low management level and low quality of their employees, which is indeed a reality. To this end, it is becoming more and more important to manage and standardize the production and manufacture of wooden doors through software. Good professional, all in the industry view.

5、安装便捷化

5. Convenient installation

指安装工人在工地现场使用简单的工具，实现快速的安装。同时简化安装工人的操作，五金孔等所有的加工均在厂内完成，提高效率。

It means that the installation workers use simple tools at the site of the site to achieve rapid installation. At the same time, the operation of the installation workers is simplified, and all the processing of the hardware holes are completed in the factory, and the efficiency is improved.