| 如何区分烤漆门与喷漆门？ |
| 添加时间：2017/11/27 15:16:54 浏览次数： |
| 建材市场上各种木门混杂，普通的消费者对各种木门很难区分，就拿烤漆门和喷漆门来说，虽然只有一个字的差别，但是在工艺上却又很大的区别。那么如何区别烤漆门与喷漆门呢?门业视界小编为您娓娓道来！ Building materials market, a variety of wooden doors mixed, ordinary consumers on a variety of wooden doors are difficult to distinguish, take paint doors and paint doors, although there is only one word difference, but in terms of technology but also a big difference. How to distinguish and spray paint the door door door? Horizon Xiaobian meanders! 一、工艺 First, process A、烤漆：在基材上打三遍底漆、四遍面漆，每上一遍漆，都送入无尘衡温烤房，烘烤。 A, paint: three times on the substrate, primer, four times the top coat, every time the paint, sent to the dust-free temperature baking room, baking. B、喷漆：在基材上磨呢子，再在上面喷上漆，自然晾干。 B, the paint: on the substrate on which the woolen mill, spray paint, dry naturally. 二、漆膜 Two. Paint film 做法：用手摸烤漆门板的四边棱角，是否光滑、凭证；观察棱角的颜色，是否与门板颜色相同。 Methods: touch the door with four edges and corners, whether it is smooth and certificate; observe the color of the edge, whether it is the same color as the door panel. 对比： Contrast： A、烤漆：棱角光滑、颜色相同。证明漆膜均匀，色彩饱满。 A, paint: smooth edges, the same color. It is proved that the paint film is uniform and full of color. B、喷漆：棱角部分毛糙，颜色比门板浅。证明漆膜不均匀，色彩不饱满: B, the paint: rough edges part, shallow color than the door. It is proved that the paint film is uneven and the color is not full: 三、纹路 Three, lines 做法：对照光线，看烤漆门板表面，是否有桔皮现象。 Practice: contrast the light, see the paint door surface, whether there is orange peel phenomenon. 对比： Contrast： A、烤漆：门板表面光滑，无纹路、桔皮现象。 A, paint: door surface smooth, no lines, orange peel phenomenon. B、喷漆：门板表面有纹路，不光滑，有桔皮现象。 B, spray painting: the door surface has lines, not smooth, orange peel phenomenon. 四、表面 Four, surface 做法：用手摸烤漆门板表面，是否有尘粒、气泡。 Practice: paint the door surface with hand, whether there are dust particles, bubbles. 对比： Contrast： A、烤漆：门板表面平整、光滑。 A, paint: the door surface is smooth and smooth. B、喷漆：门板表面有颗粒物，不光滑，触摸有异感。 B, spray paint: the door surface has particles, not smooth, touch different feeling. 五、耐磨 Five, wear resistance 做法：用硬物击打。 Practice: hit with hard objects. 对比： Contrast： A、烤漆：无异常情况，漆膜无损坏。 A, baking paint: no abnormal circumstances, no damage to the paint film. B、喷漆：有裂痕，严重的漆膜脱落，掉白皮。 B, spray paint: cracks, serious film peeling off, white peel. 所以，同等材质，同等品牌，同等条件下，烤漆的永远是比喷漆的要好一点。烤漆是高温加工的，这样做的好处是油漆能够最大程度融入材质里面，后期不易返潮，蜕皮。摸起来感觉也很好。喷漆门是直接先把门加工出来，然后表面喷漆，先前的话是和烤漆门没有什么区别的，但后期的话，烤漆门容易起皮，返潮。所以你要是同等材质，同等品牌下，你还是要选择烤漆门的。 Therefore, the same material, the same brand, under the same conditions, the paint is always better than the paint. The paint is in high temperature processing, the benefits of doing so is to paint to the greatest extent into the material inside, late is not easy to get damp, molting. It feels good, too. Paint the door first door is directly processed, then the surface paint, then there is no difference between what previously and paint the door, but later, paint the door easy peeling, damp. So if you are the same material, under the same brand, you still have to choose paint door. |
| 上一页 实木门复合门静音效果好不好？ |
| 下一页 烤漆门的那些事，你知道多少？ |
Copyright © 技术支持：遨游网络