烤漆门安装-组装门套
Paint door installation - door pocket assembly
（1）现在的门产品都是厂家上门，进行尺寸的测量之后，再进行产品的生产加工，它的各个配件都是零散，在烤漆门安装之前，需要对门套进行组装。
(1) the current door products are all delivered by the manufacturer. After the measurement of the size, the production and processing of the products can be carried out. Each part of the door is scattered. Before the installation of the paint baking door, the door pocket needs to be assembled.
（2）组装时，先将门套和立板找出，根据背面编号对好接口，接口要在同一平线上，先在接口处涂上胶水，在接口后面的引孔上，打上80毫米木牙螺丝，用螺丝刀将其拧紧。
(2) when assembling, first find out the door pocket and the vertical plate, and align the interface according to the back number. The interface should be on the same flat line. First, apply glue on the interface, punch 80 mm wood screw on the leading hole at the back of the interface, and tighten it with a screwdriver.